TPS64200DBVR
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS64200 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 6.5V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Input Voltage-Nom | 3.8V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive or Negative |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 1.8V~6.5V |
| Quiescent Current | 20μA |
| Control Features | Enable |
| Max Output Voltage | 6.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6.5V |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 350kHz |
| Duty Cycle (Max) | 100% |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 13.409324mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
TPS64200DBVR Overview
It comes in the SOT-23-6 package, which makes switching controller suitable for most applications. dc motor controller is suitable for 1 output generation. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 1.8V~6.5V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. A generalization of dc dc regulator can be made using Surface Mount. Enable provides dcdc regulator efficient switching control. SWITCHED CAPACITOR REGULATOR analog IC connects the switch converters. There are a DUAL terminal on the switching converters. A variety of dc switching's functions can be performed on 6 terminations. The DC switcher's nominal voltage is 3.8V. Other relevant dc to dc converter ics can be found by searching "TPS64200". Total pins of switching converter are 6. Statistically, DC regulator outputs 6.5V volts. A starting point for a project is to note down the dc dc regulator's usual output current, which is 3A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. In a dormant state, the dc switching uses 20μA. In order to limit the voltage of a dc switcher whose maximum input voltage is 6.5V, it must be limited by the user. A dc switcher can only produce an output current of 3A. As per its datasheet, the switching converter has a maximum output of 6.5V volts. It is possible for this switching controller to switch at a frequency of 350kHz.
TPS64200DBVR Features
Transistor Driver Outputs
Enable
TPS64200DBVR Applications
There are a lot of Texas Instruments TPS64200DBVR DC to DC converter applications.
- USB circuits
- Product burn-in
- Smart grid
- Boring machines
- Industrial controllers
- Smoke exhaust equipment
- Series voltage regulation circuits
- Hydro power
- Wind power
- Various precision measuring detectors
