TPS64200DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 13.409324mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS64200 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 6.5V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Input Voltage-Nom | 3.8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Power Dissipation | 400mW |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 1.8V~6.5V |
| Quiescent Current | 20μA |
| Control Features | Enable |
| Max Output Voltage | 6.5V |
| Topology | Buck |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6.5V |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 3.8V |
| Min Output Voltage | 1.2V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Switching Frequency | 350kHz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS64200DBVT Overview
In the SOT-23-6 package, the switching controller meets most application requirements. For outputs of 1, this dc motor controller is suitable. Cut Tape (CT) is the solid enclosure in which PMIC is packaged. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 1.8V~6.5V. Qualified to work in a -40°C~85°C TA dc switcher. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. An array of 6 terminations of dc switching. A DC switcher's nominal voltage of 3.8V is input. In addition to "TPS64200", there are other relevant dc to dc converter ics you can find. There are 6 pins on switching converter. As determined by the test statistics, the output voltage of DC regulator is 6.5V. In most cases, the dc dc regulator's output current is 3A. This information should be noted when you begin working with the component. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. When the dc switching is dormant, it uses 20μA. You can set the input voltage to 3.8V for nominal working status. In order to ensure the dc switcher's functionality, users must limit the voltage to 6.5V due to the dc switcher's maximum input voltage. Voltage 1.8V is needed for the supply. There will be 3A current output from the dc switcher above 3A. A datasheet states that the switching converter can output 6.5V volts at its maximum. voltage controllers with a minimum voltage output of 1.2V cannot operate. This controller performs best at a frequency of 350kHz.
TPS64200DBVT Features
Transistor Driver Outputs
Enable
Max Duty Cycle: 100 %
Switching Frequency: 350kHz
TPS64200DBVT Applications
There are a lot of Texas Instruments TPS64200DBVT DC to DC converter applications.
- Magnetohydrodynamic power
- Hydro power
- Electric heating, lighting
- Drilling machines
- Digital video recorders
- Fire elevators
- Electrical power transmission
- Surface processing equipment
- Network technology
- Remotely powered electric motors
