TPS64201DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 13.409324mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS64201 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 6.5V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Operating Supply Voltage | 6.5V |
| Input Voltage-Nom | 3.8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 1.8V~6.5V |
| Quiescent Current | 20μA |
| Control Features | Enable |
| Max Output Voltage | 6.5V |
| Topology | Buck |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6.5V |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.2V |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 450kHz |
| Max Duty Cycle | 100 % |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS64201DBVR Overview
In the SOT-23-6 package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 1.8V~6.5V. Worked in a -40°C~85°C TA dc switcher before. dc dc regulator can be generalized using Surface Mount. Enable provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of 6 terminations are available in dc switching. The nominal DC switcher's voltage input is 3.8V. TPS64201 can be searched for other relevant dc to dc converter ics. Switching converter has a total of 6 pins. The test statistics indicate that DC regulator outputs a voltage of 6.5V. It's important to remember that the dc dc regulator's normaloutput current is 3A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. A circuit should contain 6.5V in order to ensure the voltage regulator dc to dc runs safely and reliably. Dormant dc switchings use 20μA. The maximum input voltage of the dc switcher is 6.5V, so users need to limit the voltage accordingly. Voltage 1.8V is needed for the supply. There will be 3A current output from the dc switcher above 3A. Depending on the datasheet, the switching converter can output 6.5V volts at its peak. At least 1.2V voltage is output by the voltage controller. The maximum frequency of this controller is 450kHz.
TPS64201DBVR Features
Transistor Driver Outputs
Enable
Max Duty Cycle: 100 %
TPS64201DBVR Applications
There are a lot of Texas Instruments TPS64201DBVR DC to DC converter applications.
- ATMs
- Radio equipment
- Arc suppression circuits
- Gear/thread machining machines
- Product burn-in
- Smart grid
- Die casting equipment
- Sink circuits
- Product testing
- Industrial controllers
