TPS64201DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 13.409324mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS64201 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 6.5V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Input Voltage-Nom | 3.8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Power Dissipation | 400mW |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 1.8V~6.5V |
| Quiescent Current | 20μA |
| Control Features | Enable |
| Max Output Voltage | 6.5V |
| Topology | Buck |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6.5V |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 3.8V |
| Min Output Voltage | 1.2V |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Switching Frequency | 450kHz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS64201DBVT Overview
In the SOT-23-6 package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. There is a Cut Tape (CT) solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). dc controls with 1.8V~6.5V voltage are supplied and operated. Suitable for a -40°C~85°C TA dc switcher. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Enable. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. There are many different types of terminations for 6. There is a DC switcher's nominal voltage of 3.8V. TPS64201 can be searched for other relevant dc to dc converter ics. Pins number 6 of switching converter in total. According to the test statistics, DC regulator outputs 6.5V voltage. In most cases, the output current of the dc dc regulator will be 3A, so note that when you start the project. As long as the dc switching is in a dormant state, it utilizes 20μA. Input voltage can be set to 3.8V for nominal working status. In order to limit the voltage of a dc switcher whose maximum input voltage is 6.5V, it must be limited by the user. A voltage of 1.8V must be present in the supply. In this case, the dc switcher won't produce more than 3A watts of output current. Datasheets indicate that the switching converter can output 6.5V volts at its maximum. At least 1.2V voltage is output by the voltage controller. At 450kHz, this controller will mostly work as expected.
TPS64201DBVT Features
Transistor Driver Outputs
Enable
Switching Frequency: 450kHz
TPS64201DBVT Applications
There are a lot of Texas Instruments TPS64201DBVT DC to DC converter applications.
- Wide-range voltage regulation circuits
- Computer monitoring equipment of building
- Game consoles
- Solar power plants
- Magnetohydrodynamic power
- Remotely powered electric motors
- Computer-related products
- Pipe bending machines
- Machining centers
- Computer rooms
