TPS64202DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 13.409324mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS64202 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 6.5V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Input Voltage-Nom | 3.8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 1.8V~6.5V |
| Quiescent Current | 20μA |
| Control Features | Enable |
| Max Output Voltage | 6.5V |
| Topology | Buck |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6.5V |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.2V |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Switching Frequency | 550kHz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS64202DBVR Overview
As a result of SOT-23-6 compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 1. A solid enclosure of Tape & Reel (TR) surrounds pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 1.8V~6.5V volts and has 1.8V~6.5V supply voltage. Qualified to work in an dc switcher with -40°C~85°C TA. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Enable which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position DUAL . 6 terminations with various dc switching's functions. It is inputted with a DC switcher's voltage of 3.8V. Searching "TPS64202" will return other relevant dc to dc converter ics. There are only 6 pins on switching converter. A 6.5V voltage of DC regulator was detected in the test statistics. You should note that the dc dc regulator's usual output current is 3A. Dormant dc switchings use 20μA. In order to limit the voltage of a dc switcher whose maximum input voltage is 6.5V, it must be limited by the user. A voltage of 1.8V must be present in the supply. In this case, the dc switcher won't produce more than 3A watts of output current. Datasheets state the switching converter can output up to 6.5V volts. At least 1.2V voltage is output by the voltage controller. At 550kHz, this controller will mostly work as expected.
TPS64202DBVR Features
Transistor Driver Outputs
Enable
Switching Frequency: 550kHz
TPS64202DBVR Applications
There are a lot of Texas Instruments TPS64202DBVR DC to DC converter applications.
- Access control systems
- Die casting equipment
- Medical monitoring systems
- Drilling machines
- Sensitive electronic devices
- Industrial controllers
- Game consoles
- Combined machine tools
- Handheld GPS
- Current source circuits
