TPS64202DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 13.409324mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS64202 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 6.5V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Input Voltage-Nom | 3.8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 1.8V~6.5V |
| Quiescent Current | 20μA |
| Control Features | Enable |
| Max Output Voltage | 6.5V |
| Topology | Buck |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6.5V |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.2V |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Switching Frequency | 550kHz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS64202DBVT Overview
With a SOT-23-6 package, the switching controller is suitable for a wide range of applications. dc motor controller is suitable for 1 output generation. There is a Cut Tape (CT) solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 1.8V~6.5V and has a 1.8V~6.5V supply voltage. Suitable for a -40°C~85°C TA dc switcher. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. A variety of 6 terminations are available in dc switching. The nominal DC switcher's voltage input is 3.8V. Search for "TPS64202" to find other relevant dc to dc converter ics. In total, switching converter has 6 pins. Statistically, DC regulator outputs 6.5V volts. In most cases, the output current of the dc dc regulator will be 3A, so note that when you start the project. DC switchings that are dormant use 20μA. The maximum input voltage of the dc switcher is 6.5V, so users need to limit the voltage accordingly. The supply voltage must be 1.8V. Output current will not exceed 3A. As per its datasheet, the switching converter has a maximum output of 6.5V volts. Neither the voltage controller's lowest voltage output 1.2Vr its highest voltage output is less than 1.2V. 550kHz is the frequency at which this controller can mostly perform fine.
TPS64202DBVT Features
Transistor Driver Outputs
Enable
Switching Frequency: 550kHz
TPS64202DBVT Applications
There are a lot of Texas Instruments TPS64202DBVT DC to DC converter applications.
- Nuclear power plants
- Industrial controllers
- SMT equipment
- Electric water heaters
- PSRR circuits
- Computer application technology
- Domestic water pumps
- Computer-related products
- Scientific testing
- Hydrogen power
