TPS64203DBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 13.409324mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS64203 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 6.5V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Operating Supply Voltage | 6.5V |
| Input Voltage-Nom | 3.8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 1.8V~6.5V |
| Quiescent Current | 20μA |
| Control Features | Enable |
| Max Output Voltage | 6.5V |
| Topology | Buck |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6.5V |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.2V |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 800kHz |
| Duty Cycle (Max) | 100% |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS64203DBVTG4 Overview
It comes in the SOT-23-6 package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 1.8V~6.5V. Work well in dc switchers with a -40°C~85°C TA. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Enable. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. An array of 6 terminations of dc switching. There is a DC switcher's nominal voltage of 3.8V. Searching "TPS64203" will return other relevant dc to dc converter ics. In total, switching converter has 6 pins. DC regulator outputs 6.5V voltage according to the test statistics. normally, the dc dc regulator's output current is 3A, which you should keep in mind when starting a project. To run the voltage regulator dc to dc safely and reliably, users should apply 6.5V to the voltage regulator dc to dc. When the dc switching is dormant, it uses 20μA. Because the dc switcher's maximum input voltage is 6.5V users must limit the voltage accordingly. 1.8V is the required supply voltage. In this case, the dc switcher won't produce more than 3A watts of output current. At its maximum, the switching converter can output 6.5V volts. At least 1.2V voltage is output by the voltage controller. 800kHz is the top frequency at which this switching controller can switch.
TPS64203DBVTG4 Features
Transistor Driver Outputs
Enable
TPS64203DBVTG4 Applications
There are a lot of Texas Instruments TPS64203DBVTG4 DC to DC converter applications.
- Driver circuits
- SMT equipment
- Grinders
- Packaging
- Photovoltaic power
- Thermal power
- Shearing machines
- Lathes
- Correction machines
- Industrial robots
