TPS65010RGZRG4
| Parameters | |
|---|---|
| Supply Current-Max (Isup) | 0.05mA |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 500mA |
| Battery Pack Voltage | 4.2V |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.25MHz |
| Base Part Number | TPS65010 |
| Pin Count | 48 |
| Output Voltage | 3.3V |
| Power Supplies | 3.6V |
| Number of Channels | 2 |
| Interface | I2C, USB |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1A |
| Adjustable Threshold | YES |
| Quiescent Current | 70μA |
TPS65010RGZRG4 Overview
There is a package Tape & Reel (TR) available.There is currently a package available named 48-VFQFN Exposed Pad.In this case, the device is mounted in the way of Surface Mount.Keeping the temperature at -40°C~85°C TA will ensure reliable performance.This device makes use of an analog IC of POWER SUPPLY SUPPORT CIRCUIT.To charge the device, there is a requirement for Constant - Programmable current.There are related parts to this device according to the base part number TPS65010.It contains a total of 48 terminations.There is a setting of 4.2V for the battery pack.In total, it has 48 pins.A maximum charging current of 500mA is recommended.In order for the product to function as intended, there are 48 pins that must be connected.The total number of channels that can be accessed by users is 2.A 3.6V battery should be sufficient.The board is capable of handling a voltage input of zero volts.It is possible to achieve high efficiency by using an output voltage of 3.3V.In this case, the output current of the device is set to 1A.There is a subcategory of Power Management Circuits for this device.It is capable of functioning at a voltage as low as possible, for example 4.5V voltage for this circuit is used.As far as the mounting is concerned, it is mounted in the way of Surface Mount.In order to ensure optimum supply voltage, the maximum voltage setting is set to 0.05mA.A power supply setting of 0 has been assigned to the part.
TPS65010RGZRG4 Features
Battery pack voltage of 4.2V
2 channels
Power Management Circuits subcategory
48-VFQFN Exposed Pad package
TPS65010RGZRG4 Applications
There are a lot of Texas Instruments TPS65010RGZRG4 Battery Chargers ICs applications.
- Electric lift car
- Portable medical equipment
- Automotive electronics
- Military equipment
- Fast charge
- Industrial handhelds
- Mobile point-of-sale (mPOS) terminals
- GPS portable devices
- Charging cradle for wearable devices
- High end, feature-rich consumer
