banner_page

TPS65021RHAT

-40°C~85°C TA 3 Channel QUAD Battery Management ICs 3.6V TPS65021 40 Pins 1 Cell Lithium Ion/Polymer 40-VFQFN Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS65021RHAT
  • Package: 40-VFQFN Exposed Pad
  • Datasheet: -
  • Stock: 904
  • Description: -40°C~85°C TA 3 Channel QUAD Battery Management ICs 3.6V TPS65021 40 Pins 1 Cell Lithium Ion/Polymer 40-VFQFN Exposed Pad(Kg)

Details

Tags

Parameters
Max Supply Voltage 6V
Min Supply Voltage 2.5V
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Output Current 1.2A
Adjustable Threshold YES
Quiescent Current 85μA
Max Output Voltage 6V
Max Input Voltage 6V
Supply Current-Max (Isup) 0.043mA
Fault Protection Over Temperature, Under Voltage
Battery Chemistry Lithium Ion/Polymer
Number of Cells 1
Height 1mm
Length 6mm
Width 6mm
Thickness 900μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 40-VFQFN Exposed Pad
Number of Pins 40
Weight 103.986051mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 40
Termination SMD/SMT
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.6V
Terminal Pitch 0.5mm
Frequency 1.5MHz
Base Part Number TPS65021
Function Power Management
Output Voltage 6V
Number of Channels 3
Interface I2C

TPS65021RHAT Overview


40-VFQFN Exposed Pad is the appropriate package for battery instrument. IC POWER SUPPLY SUPPORT CIRCUIT is the system battery's analog IC. There are 3 channels available. Currently, there are 40 pins on it. The case is labeled Tape & Reel (TR). You can mount this electronic part by using Surface Mount. In order for this electric part to operate properly, its supply voltage must not be lower than 2.5V volts. There is a electronic part mounted in the way of Surface Mount. In order for this power management IC to function correctly, the supplied voltage can't exceed 6V volts. It is able to deliver the Power Management functions. It is best for the electric part to operate temperature at the range of -40°C~85°C TA to deliver its performance. There is Lithium Ion/Polymer in the battery chemistry of this electronic component. It is always recommended that this battery protection IC is set to 3.6V. There is a use of the TPS65021 family. Unless specified otherwise, Isup (the maximum supply current) must not exceed 0.043mA. The system battery input voltage can be powered under 6V. There is a maximum current available to the transceiver ic of 1.2A.

TPS65021RHAT Features


Available in 40-VFQFN Exposed Pad Package
with 40 Pins
Mounting Type: Surface Mount
Battery Chemistry : Lithium Ion/Polymer
operate supply voltage at the range of 3.6V
Output Voltage at the range of 6V

TPS65021RHAT Applications


There are a lot of Texas Instruments TPS65021RHAT Battery Management ICs applications.

  • Electric street sweepers
  • Motor drive - single phase AC100V-240V non -isolated
  • Utility vehicles
  • Ventilator
  • DC/DC converter
  • Grid power infrastructure
  • Robots
  • Garbage compressors
  • Golf cars
  • Industrial AC/DC converter

Write a review

Note: HTML is not translated!
    Bad           Good