TPS650242RHBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.6V |
| Frequency | 2.25MHz |
| Base Part Number | TPS650242 |
| Function | Power Management |
| Number of Outputs | 6 |
| Output Voltage | 1V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 800mA |
| Adjustable Threshold | YES |
| Max Output Voltage | 1.5V |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Supply Current-Max (Isup) | 2.5mA |
| Dropout Voltage | 65mV |
| Fault Protection | Over Temperature, Under Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS650242RHBT Overview
The 32-VFQFN Exposed Pad package is suitable for battery instrument. The analog IC in this power management IC is POWER SUPPLY SUPPORT CIRCUIT. Channels are available on 2. The smart tools battery has 32 pins in total. Tape & Reel (TR) is the case number of the package. A voltage of at least 2.5V volts is required on this electric component. This electronic component is mounted in the way of Surface Mount. This power IC's supplied voltage should not exceed 6V volts. In addition to Power Management functions, it can deliver other functions as well. To best deliver its performance, the electronic part should be operated at a temperature of -40°C~85°C TA. There is Lithium Ion/Polymer in the battery chemistry of this electronic component. This battery management IC should always be set to 3.6V. The model is based on the TPS650242 family. (Isup) must have a maximum current of 2.5mA. A chip input voltage of 6V can be used to power it. There is 2.5V voltage limit on the battery protector ic, so it can operate below 2.5V. This power management IC can supply a maximum current of 800mA. A electric part with 6 outputs has been configured.
TPS650242RHBT Features
Available in 32-VFQFN Exposed Pad Package
with 32 Pins
Mounting Type: Surface Mount
Battery Chemistry : Lithium Ion/Polymer
operate supply voltage at the range of 3.6V
Output Voltage at the range of 1V
With 6 outputs
TPS650242RHBT Applications
There are a lot of Texas Instruments TPS650242RHBT Battery Management ICs applications.
- Consumer electronics
- Cleaning machines
- Motor drive - 3 phase AC100V-240V AC servo
- Front light
- Scooters
- UAV
- Service robotics
- On-board battery charger
- 3-wheelers
- ADAS Lidar
