TPS650244RHBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.6V |
| Frequency | 2.25MHz |
| Base Part Number | TPS650244 |
| Function | Power Management |
| Number of Outputs | 6 |
| Output Voltage | 1.55V |
| Max Output Current | 800mA |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 85μA |
| Output Current | 800mA |
| Adjustable Threshold | YES |
| Max Output Voltage | 6V |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Supply Current-Max (Isup) | 2.5mA |
| Dropout Voltage | 65mV |
| Min Output Voltage | 2.5V |
| Fault Protection | Over Temperature, Under Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS650244RHBT Overview
The 32-VFQFN Exposed Pad package is appropriate for it. The analog IC in this power management IC is POWER SUPPLY SUPPORT CIRCUIT. It is possible to access 2 channels. 32 pins are present on it. The smart tools battery is packaged in a Tape & Reel (TR) case. The voltage supply for this electric component should not be less than 2.5V volts. In this case, this electrical part is mounted in the way of Surface Mount. This power IC's supplied voltage should not exceed 6V volts. It is able to deliver the Power Management functions. For the electric part to perform effectively, it should operate at a temperature around -40°C~85°C TA. This electronic part includes a Lithium Ion/Polymer chemistry battery. It is always recommended that this battery protection IC is set to 3.6V. A TPS650244 family is used in it. The supply (Isup) must provide 2.5mA more than 2.5mA current. There is an option to power the system battery under 6V voltage. If the input voltage is below 2.5V, the manage IC is suitable for use. This power management IC can supply a maximum current of 800mA. Powered by a 85μA supply current, it operates on minimal power. This electric component has a configuration of 6 outputs.
TPS650244RHBT Features
Available in 32-VFQFN Exposed Pad Package
with 32 Pins
Mounting Type: Surface Mount
Battery Chemistry : Lithium Ion/Polymer
operate supply voltage at the range of 3.6V
Output Voltage at the range of 1.55V
With 6 outputs
TPS650244RHBT Applications
There are a lot of Texas Instruments TPS650244RHBT Battery Management ICs applications.
- Cell phone towers
- Buses
- ADAS camera system
- Service robotics
- Home appliances
- Rear light with dynamic control
- Cleaning machines
- Electric vehicles
- Motor bikes
- xEV charging station (off-board charger)
