TPS650245RHBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.6V |
| Frequency | 2.25MHz |
| Base Part Number | TPS650245 |
| Function | Power Management |
| Number of Outputs | 6 |
| Output Voltage | 900mV |
| Max Output Current | 1A |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 85μA |
| Output Current | 800mA |
| Adjustable Threshold | YES |
| Max Output Voltage | 1.1V |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Supply Current-Max (Isup) | 2.5mA |
| Dropout Voltage | 65mV |
| Fault Protection | Over Temperature, Under Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS650245RHBT Overview
The package 32-VFQFN Exposed Pad is appropriate for battery instrument. This system battery uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. A total of 2 channels are available. There are 32 pins on it. It's packaged in a Tape & Reel (TR) case. In order for this electric part to operate properly, its supply voltage must not be lower than 2.5V volts. There is a mounting point for this electronic component in the direction of Surface Mount. A voltage of 6V volts is recommended for this power IC. It is capable of delivering the Power Management functions. Optimal performance of the electric part depends on operating temperature at -40°C~85°C TA. The battery chemistry of this electronic component includes Lithium Ion/Polymer. You should leave this transceiver ic set to 3.6V at all times. This is a family based on TPS650245. The maximum supply current (Isup) must not exceed 2.5mA. Under 6V, it is possible to power the battery instrument input voltage. There is 2.5V voltage limit on the battery protector ic, so it can operate below 2.5V. 800mA is the maximum current the power ICs can accept. This smart tools battery operates on a 85μA volt supply current. The electric part is configured with 6 outputs.
TPS650245RHBT Features
Available in 32-VFQFN Exposed Pad Package
with 32 Pins
Mounting Type: Surface Mount
Battery Chemistry : Lithium Ion/Polymer
operate supply voltage at the range of 3.6V
Output Voltage at the range of 900mV
With 6 outputs
TPS650245RHBT Applications
There are a lot of Texas Instruments TPS650245RHBT Battery Management ICs applications.
- Continually optimizing battery performance
- DC/DC converter
- Solar and wind-generating plants
- Weather stations
- Power tools
- IH rice cooker
- Reporting operational status to external devices
- Electric street sweepers
- LED lighting
- Buses
