TPS65132L0YFFR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 15-UFBGA, DSBGA |
| Number of Pins | 15 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 15 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS65132 |
| Pin Count | 15 |
| Operating Supply Voltage | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C |
| Operating Supply Current | 540μA |
| Max Supply Current | 540μA |
| Quiescent Current | 540μA |
| Topology | Boost |
| Display Type | LCD, OLED |
| Max Frequency | 400kHz |
| Consumer IC Type | CONSUMER CIRCUIT |
| Height | 625μm |
| Length | 0m |
| Width | 0m |
| Thickness | 400μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS65132L0YFFR Overview
Display drivers is packaged in the way of Tape & Reel (TR).In version 15-UFBGA, DSBGA, it is included.I would like to point out that this electrical device has a LCD, OLED display type.This electronic component is mounted on the board using the Surface Mount axis.Display drivers is operating at -40°C~85°C degrees FahrenheDisplay drivers.Display drivers should work wDisplay driversh a 2.5V~5.5VV power source.There are 15 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Among the TPS65132 family of devices, this is one.A device consists solely of 15 pins.As a matter of fact, it has 15 pins installed.An electronic component is mounted on a board by way of a Surface Mount-axis using the Surface Mount-axis as a guide.A supply current is required for 540μA to fully function.For high efficiency, the supply voltage should be maintained at 5.5V.In this case, 540μA is the maximum amount of current that can be supplied for its operation.With a frequency of 400kHz, it operates at a specific rate.While 540μA of quiescent current is consumed, external influences make no difference.
TPS65132L0YFFR Features
15-UFBGA, DSBGA package
TPS65132 family
15 pin count
15 pins
TPS65132L0YFFR Applications
There are a lot of Texas Instruments TPS65132L0YFFR display drivers applications.
- Battery Operated Applications
- Panel meters
- Wal4 and table clocks
- Automotive Telecom
- Display Driver
- Numerlc and Non-Numerlc Panel Dlsplays
- Dlsplay Integrtty ls Compromissd
- Industrial Controllers
- Small Appliances
- LED Matrix Displays
