TPS68000DBTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Type | CCFL Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Voltage - Supply | 8V~30V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 30kHz~100kHz |
| Base Part Number | TPS68000 |
| Pin Count | 30 |
| Output Voltage | 12V |
| Max Output Current | 25mA |
| Input Voltage-Nom | 24V |
| Operating Supply Current | 25mA |
| Nominal Supply Current | 25mA |
| Output Current | 25mA |
| Input Voltage (Min) | 8V |
| Switcher Configuration | PUSH-PULL |
| Dimming | Yes |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS68000DBTR Overview
Materials are packaged according to Tape & Reel (TR)'s specifications.Manufacturers of electronic devices recogni30-TFSOP (0.173, 4.40mm Width)e the 30-TFSOP (0.173, 4.40mm Width)'s low packaging cost.PCB mounting is done using Surface Mount.As a standard grade, it's referred to as Type CCFL Controller.It requires a power supply voltage to function properly.At -40°C~85°C, it should always be operated.It is still accurate at 30kHz~100kHz frequency.Best part of the device is the number TPS68000.The terminations are of type 30.1 functions are run on the device.Device 25mA has a 25mA supply current.In this case, 30 is the pin number for the component.In total, it has 30 pins.In the Surface Mount-axis, the mounting is performed.In this instance, the output current is set to 25mA.A minimum input voltage of 8V will allow it to function.A device like this can be controlled by 12V's output.As far as output current is concerned, it works in 25mA range at most.
TPS68000DBTR Features
Mounting type of Surface Mount
TPS68000DBTR Applications
There are a lot of Texas Instruments TPS68000DBTR Lighting Controllers applications.
- Power factor correction (PFC)
- Noise filtering
- Spot welding
- Coupling or blocking
- Signal decoupling & power bypass
- UPS buffering
- Decoupling or bypassing
- Motor start
- To reduce power noise & signal noise
- Lighting ballast
