TPS68402A0RHFR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.25MHz |
| Base Part Number | TPS68402 |
| Pin Count | 24 |
| Number of Outputs | 3 |
| Max Output Current | 150mA |
| Operating Supply Voltage | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1.7mA |
| Voltage - Output | 4.55V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Current - Output / Channel | 150mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | I2C |
| Number of Segments | 3 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS68402A0RHFR Overview
The board's 24-VFQFN Exposed Pad package saves space. LED drivers are designed with 3 outputs.Surface Mount is used for mounting.In this case, it emerges as a DC DC Regulator with a high efficiency.The led light driver can work at -30°C~85°C TA.As a result, Backlight is likely to benefit greatly.The frequency of 1.25MHz determines how it operates.In this case, the termination value is 24.To form its configuration, there are 24 pins.Based on our estimates, there are 3 segments.The base part number for this LED driver is TPS68402.The voltage of 5.5V is acceptable.There is 4.55V voltage output from the device.There are 24 pins on this device.Furthermore, it can be classified as Display Drivers based on its characteristics.At a voltage of 2.7V, it operates at a minimal input voltage.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 2.7V.Supply current cannot exceed 5.5V.Powering systems requires 3.6V voltages.When operating at the maximum output current of 150mA, it is capable of providing all the benefits associated with LED drivers.
TPS68402A0RHFR Features
Available in the 24-VFQFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Frequency of 1.25MHz
Supply voltage of 3.6V
Operating with the supply voltage of 3.6V
TPS68402A0RHFR Applications
There are a lot of Texas Instruments TPS68402A0RHFR LED Driver ICs applications.
- Panel lighting
- Stage Lighting and Signage
- Sports Facility Lighting
- Amusement Machines
- Constant Voltage Power Source for portable equipment
- LED Lightings for Inspection Devices
- Auxiliary lights for on-vehicle cameras
- Stage and Studio lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- High-end retail lighting
