TPS75105DSKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.65W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS75105 |
| Pin Count | 10 |
| Output Voltage | 3.6V |
| Max Output Current | 25mA |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 660mW |
| Output Current | 25mA |
| Max Supply Current | 300μA |
| Quiescent Current | 180μA |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 4 |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 2.5mm |
| Width | 2.5mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS75105DSKT Overview
There is a 10-WFDFN Exposed Pad package on the board that is used to save space. Mounting is done according to the Surface Mount method.This emerges as a Linear with high efficiency and reliability.It is possible for the led light driver to operate at a temperature of -40°C~85°C TJ.It is clear that Backlight will benefit from the program.It operates with terminations of 10.Its configuration is based on 10 pins.Segments counted are 4.LED drivers can be found under the base part number TPS75105.It is acceptable for the supply voltage to be 5.5V.In addition, it is equipped with a total of 10 pins.According to its characteristics, it is also classified into Display Drivers.The minimal input voltage is 2.7V.For maximum efficiency, it requires a minimal supply voltage of 2.7V.5.5V is the maximum value of supply current that can be used.When the supply current should be less than 300μA, the device will provide high efficiency.The load is capable of receiving 25mA current.The maximum output current of 25mA allows it to deliver all benefits of a LED driver.The consumption of current is 180μAin the absence of external factors.This device produces a voltage of 3.6V as its output.
TPS75105DSKT Features
Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TJ
Supply voltage of 3.8V
Output voltage of 3.6V
TPS75105DSKT Applications
There are a lot of Texas Instruments TPS75105DSKT LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- LED Lightings for Inspection Devices
- Flicker-free LED Lighting using R1580N
- LED headlights
- Down lights
- LED Lighting PFCs, Linear Dimmable
- OLED power supply for portable equipment
- A- lamps
- General lighting
- Medical surgery lighting
