TPS92001DGKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz |
| Base Part Number | TPS92001 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 21V |
| Power Dissipation | 664mW |
| Output Current | 800mA |
| Max Supply Current | 900μA |
| Quiescent Current | 600μA |
| Voltage - Output | 5V |
| Topology | Flyback, Step-Down (Buck) |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Fall Time (Typ) | 18 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Dimming | Triac |
| Switching Frequency | 110kHz |
| Duty Cycle | 70 % |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS92001DGKR Overview
To save space on the board, it has a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. Using this LED driver, there are 1 outputs.In this case, mounting method is Surface Mount.With high reliability and efficiency, this emerges as a AC DC Offline Switcher.It is able to work normally at the operating temperature of -40°C~105°C TJ.Lighting has many benefits.The system operates at a frequency of 100kHz.The operation of this system is supported by 8 terminations.In this LED driver, the base is configured as 8.This LED driver can be found under the base part number TPS92001.An acceptable maximum value for the supply voltage is 21V.A voltage of 5V is produced by it.The device has 8 pins.When the supply current should be less than 900μA, the device will provide high efficiency.Loads can only be powered by 800mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 110kHz.In the absence of external factors, there is 600μA consumption of current.The output voltage is 5V.Operation of the device requires 12V volts to be applied to the circuit.
TPS92001DGKR Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~105°C TJ
Frequency of 100kHz
Switching frequency of 110kHz
Output voltage of 5V
TPS92001DGKR Applications
There are a lot of Texas Instruments TPS92001DGKR LED Driver ICs applications.
- Scanners and Handy Terminals
- General lighting
- Amusement Machines
- Stage Lighting and Signage
- Down lights
- LED Lighting PFCs, Linear Dimmable
- Down lighting
- LED Lightings for Inspection Devices
- Industrial LED Lighting: Image Recognition Devices
- LED backlight driver for LCD displays for portable equipment
