TPS92315DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -20°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS92315 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 25V |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 9V |
| Nominal Supply Current | 2.1mA |
| Output Current | 2A |
| Max Supply Current | 2.1mA |
| Quiescent Current | 2.1mA |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | FREQUENCY MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Max Junction Temperature (Tj) | 125°C |
| Switching Frequency | 130kHz |
| Voltage - Supply (Min) | 9V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS92315DBVR Overview
Space is saved using its SOT-23-6 package. LED drivers use 1 outputs for their design.Surface Mount is used for mounting.Initially, it emerges as a AC DC Offline Switcher with high efficiency and a high degree of reliability.It is capable of operating at a temperature of -20°C~125°C TJ. The system operates with a termination of 0.It has a base of 6 pins.Having a voltage supply below 9V can lead to undetermined failures.Surface Mount is mounted in the way.A base part number of TPS92315 is associated with this LED driver.It is acceptable to have a maximum voltage of 35V.The maximum efficiency standards can be met by operating at the minimal voltage of 9V during operation.Its high efficiency is based on the fact that the maximal supply current should not exceed 2.1mA.In this case, the load can only be supplied with 2A current.This electronic component may perform its functions fully if the switching frequency is maintained at 130kHz.There is no external factor that consumes current when there is 2.1mA current consumption.Device operation requires 25V volts from the circuit.It works well when the input voltage is higher than 9V.
TPS92315DBVR Features
Available in the SOT-23-6 package
Operating temperature of -20°C~125°C TJ
Switching frequency of 130kHz
TPS92315DBVR Applications
There are a lot of Texas Instruments TPS92315DBVR LED Driver ICs applications.
- High-end retail lighting
- Portable lighting
- Museum lighting
- Sports Facility Lighting
- Architectural lighting
- Down lights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Panel lighting
- Linear fluorescent
- General lighting
