TPS92510DGQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 100kHz~2.5MHz |
| Base Part Number | TPS92510 |
| Number of Outputs | 1 |
| Output Voltage | 58V |
| Max Output Current | 1.5A |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 3.5V |
| Output Current | 1.5A |
| Max Supply Current | 400μA |
| Quiescent Current | 300μA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 3.5V |
| Max Input Voltage | 60V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | 100μA |
| Low Level Output Current | 100μA |
| Dimming | PWM |
| Number of Segments | 2 |
| Switching Frequency | 581kHz |
| Multiplexed Display Capability | NO |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS92510DGQ Overview
The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package is used for saving board space. It has 1 outputs for LED drivers.In this case, mounting method is Surface Mount.It emerges as a DC DC Regulator with high efficiency.-40°C~125°C TJ is the operating temperature for the led light driver.Lighting has many benefits.As a result, it operates based on the frequency of 100kHz~2.5MHz.10 terminations are designed for its operation.A configuration of this chip is made up of 10 pins.There are estimated to be 2 segments.It can be found under the part number TPS92510.It is acceptable to operate with a supply voltage of 60V.The Display Drivers is also assigned based on its characteristics.At its minimal input voltage, it operates at 3.5V.A minimum supply voltage of 3.5V is required to meet the highest efficiency standards.In the case of supply current, there is a maximum value of 60V.Whenever the supply current is lower than 400μA, it can provide high efficiency.The current that can be supplied to the load is 1.5A.The electronic component can fully perform its functions if the switching frequency is maintained at 581kHz.The maximum output current of 1.5A allows it to deliver all benefits of a LED driver.A current of 300μA is consumed in the absence of external influences.There is 58V output voltage on this device.
TPS92510DGQ Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 100kHz~2.5MHz
Supply voltage of 12V
Switching frequency of 581kHz
Output voltage of 58V
TPS92510DGQ Applications
There are a lot of Texas Instruments TPS92510DGQ LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED backlight driver for LCD displays for portable equipment
- Street lighting
- Dimmable LED for vehicle interiors
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- High-end retail lighting
- Linear fluorescent
- A- lamps
- Architectural lighting
