TPS92510DGQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 100kHz~2.5MHz |
| Base Part Number | TPS92411 |
| Number of Outputs | 1 |
| Max Output Current | 1.5A |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 3.5V |
| Quiescent Current | 300μA |
| Supply Current-Max | 0.4mA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 3.5V |
| Max Input Voltage | 60V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 1.5A |
| Internal Switch(s) | Yes |
| High Level Output Current | 100μA |
| Low Level Output Current | 100μA |
| Dimming | PWM |
| Number of Segments | 2 |
| Switching Frequency | 581kHz |
| Multiplexed Display Capability | NO |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS92510DGQR Overview
Board space is saved by its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package.For the design of these LED drivers, 1 outputs are used.Surface Mount is used for mounting.In this case, the DC DC Regulator emerges as highly efficient and reliable.It is possible for the led driver ic to operate normally at -40°C~125°C TJ.Lighting has significant advantages.On the basis of the frequency 100kHz~2.5MHz, it operates.A termination of 10 is used to operate the LED driver.The base of this board is configured as 10 pins.There are 2 segments.It can be found under the part number TPS92411.60V is an acceptable voltage.Furthermore, it can be classified as Display Drivers based on its characteristics.The minimal input voltage is 3.5V.The system works with a minimum supply voltage of 3.5V in order to achieve maximum efficiency.In the case of supply current, there is a maximum value of 60V.This electronic component can fully perform when the switching frequency is 581kHz.A LED driver that operates at 1.5A output current provides all the benefits of a LED driver.When no external factors are present, there is 300μA current consumption.
TPS92510DGQR Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 100kHz~2.5MHz
Supply voltage of 12V
Switching frequency of 581kHz
TPS92510DGQR Applications
There are a lot of Texas Instruments TPS92510DGQR LED Driver ICs applications.
- LED headlights
- General lighting
- Refrigeration lighting
- Architectural lighting
- Portable lighting
- Street lighting
- Linear fluorescent
- Flicker-free LED Lighting using R1580N
- OLED power supply for portable equipment
- Stage and Studio lighting
