TPS92511DDA
| Parameters | |
|---|---|
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS92511 |
| Number of Outputs | 1 |
| Output Voltage | 65V |
| Max Output Current | 500mA |
| Max Supply Voltage | 65V |
| Output Current | 500mA |
| Max Supply Current | 2.7mA |
| Quiescent Current | 2.8mA |
| Max Output Voltage | 65V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 65V |
| Output Current per Channel | 500mA |
| Min Output Voltage | 200mV |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Min Input Voltage (DC) | 4.5V |
| Number of Segments | 2 |
| Switching Frequency | 500kHz |
| Multiplexed Display Capability | NO |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 70.590313mg |
| Operating Temperature | -40°C~125°C TA |
TPS92511DDA Overview
As a result of its 8-PowerSOIC (0.154, 3.90mm Width) package, it helps to save board space on the board. The LED driver's design uses 1 outputs.Surface Mount is used to mount the led driver.In this case, it emerges as a DC DC Regulator with a high efficiency.It is capable of working normally at -40°C~125°C TA.Lighting provides many benefits.It operates with terminations of 8.In this LED driver, the base is configured as 8.The number of segments is estimated to be 2.It's mounted in Surface Mount.It's under the TPS92511 base part number.There is no maximum value acceptable for the supply voltage, so 65V is acceptable.As its minimal input voltage, it operates at 4.5V.The maximum supply current is 65V.Its high efficiency is based on the fact that the maximal supply current should not exceed 2.7mA.The load is capable of receiving 500mA current.This electronic component may perform its functions fully if the switching frequency is maintained at 500kHz.When operating with a maximum output current of 500mA, it can deliver all the benefits of a LED driver.In the absence of external factors, there is 2.8mA consumption of current.The voltage at the output terminal is 65V.It is important that the output voltage does not exceed 65V.200mV is the minimal voltage it outputs.
TPS92511DDA Features
Available in the 8-PowerSOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 48V
Switching frequency of 500kHz
Output voltage of 65V
TPS92511DDA Applications
There are a lot of Texas Instruments TPS92511DDA LED Driver ICs applications.
- A- lamps
- Other Electronic Devices
- Stage and Studio lighting
- Down lighting
- White LED Backlight for portable equipment
- Street lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Dimmable LED for vehicle interiors
- LED headlights
- Replacement lamps
