TPS92512HVDGQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Weight | 143.193441mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | TPS92512 |
| Number of Outputs | 1 |
| Max Output Current | 2.5A |
| Max Supply Voltage | 60V |
| Output Current | 2.5A |
| Max Supply Current | 407μA |
| Quiescent Current | 337μA |
| Max Output Voltage | 58V |
| Voltage - Output | 65V |
| Topology | Step-Down (Buck) |
| Output Current per Channel | 2.5A |
| Min Output Voltage | 200mV |
| Current - Output / Channel | 2.5A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 3 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS92512HVDGQR Overview
It saves board space with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. It has 1 outputs for LED drivers.In this case, mounting method is Surface Mount.The system emerges as a DC DC Regulator with high efficiency.The led light driver operates normally at -40°C~125°C TJ. It provides considerable benefits for Lighting.Frequency 2MHz is the basis of operation.In this case, there are 10 terminations.There are 10 pins on the base of this LED driver.It is possible that failures will occur if the voltage supply is below 4.5V.There are estimated to be 3 segments.I have mounted it by Surface Mount.The base part number for this LED driver is TPS92512.A maximum supply voltage of 60V is acceptable.There is a voltage output of 65V.When the supply current should be less than 407μA, the device will provide high efficiency.A load can be supplied with 2.5A current.When operating with a maximum output current of 2.5A, it can deliver all the benefits of a LED driver.The consumption of current is 337μAin the absence of external factors.There shouldn't be an increase in output voltage over 58V.A voltage of 200mV is maintained as the minimal voltage it outputs.
TPS92512HVDGQR Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 2MHz
Supply voltage of 12V
TPS92512HVDGQR Applications
There are a lot of Texas Instruments TPS92512HVDGQR LED Driver ICs applications.
- Refrigeration lighting
- Panel lighting
- High-end retail lighting
- Down lighting
- LED backlight driver for LCD displays for portable equipment
- Portable lighting
- Gallery lighting
- A- lamps
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
