TPS92512HVDGQT
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | TPS92512 |
| Number of Outputs | 1 |
| Max Output Current | 2.5A |
| Max Supply Voltage | 60V |
| Output Current | 2.5A |
| Max Supply Current | 407μA |
| Quiescent Current | 337μA |
| Max Output Voltage | 58V |
| Voltage - Output | 65V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 60V |
| Output Current per Channel | 2.5A |
| Min Output Voltage | 200mV |
| Current - Output / Channel | 2.5A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 3 |
| Switching Frequency | 557kHz |
| Multiplexed Display Capability | NO |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold, Silver |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Weight | 143.193441mg |
| Operating Temperature | -40°C~125°C TJ |
TPS92512HVDGQT Overview
The board's 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package saves space. As part of the design of this LED driver, there are 1 outputs that have been used.Surface Mount represents this mounting method.With high efficiency, it emerges as a DC DC Regulator.If the led driver ic is set to -40°C~125°C TJ, it will work normally.The benefits it provides to Lighting are considerable.Based on the frequency of 2MHz, it operates.There are 10 terminations that are designed to operate with it.This module has 10 pins as its base.There are 3 segments.It's mounted by Surface Mount.A base part number of TPS92512 is associated with this LED driver.As a maximum value, 60V is acceptable.In this device, the output voltage is 65V volts.When the input voltage is set to 4.5V, it operates.When the maximum supply current is allowed, the value reaches 60V.If the maximum supply current is less than 407μA, the device is capable of providing high efficiency.There is no current that can be supplied to the load.As long as the switching frequency is maintained at 557kHz, this electronic component is able to perform all of its functions properly.When operating with a 2.5A output current, the LED driver delivers all the benefits.In the absence of external factors, 337μA current is consumed.It is important that the output voltage does not exceed 58V.200mV is the minimal voltage it outputs.
TPS92512HVDGQT Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 2MHz
Supply voltage of 12V
Switching frequency of 557kHz
TPS92512HVDGQT Applications
There are a lot of Texas Instruments TPS92512HVDGQT LED Driver ICs applications.
- Auxiliary lights for on-vehicle cameras
- Refrigeration lighting
- LED backlight driver for LCD displays for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- LED Lightings for Industrial Equipment
- OLED power supply for portable equipment
- Gallery lighting
- Museum lighting
- Down lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
