TPS92551TZ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-PMOD-7, Power Module |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Reach Compliance Code | compliant |
| Current Rating | 450mA |
| Base Part Number | TPS92551 |
| Number of Outputs | 1 |
| Output Voltage | 58V |
| Power Supplies | 48V |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 3mA |
| Output Current | 450mA |
| Max Supply Current | 3mA |
| Quiescent Current | 2.65mA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 60V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Max Output Power | 23W |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 16 |
| Switching Frequency | 800kHz |
| Multiplexed Display Capability | NO |
| Height | 4.8mm |
| Length | 10.16mm |
| Width | 9.85mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| Lead Free | Lead Free |
TPS92551TZ/NOPB Overview
On the board, there is also a TO-PMOD-7, Power Module package that saves space.For the design of this LED driver, 1 outputs are used.For mounting, it uses the Surface Mount method.As a result, it appears as a DC DC Regulator with a high efficiency and a high degree of reliability.It is capable of working normally at -40°C~125°C TJ.Lighting has many benefits.In this case, it operates with terminations of 0.The base of this board is configured as 7 pins.The number of segments is 16.It has been mounted on Surface Mount.The LED driver can be found under the base part number TPS92551.It is acceptable to have a maximum voltage of 60V.It is also classified into Display Drivers according to its characteristics.With a minimum input voltage of 4.5V volts, it can operate.As a result, it runs at a minimal voltage of 4.5V in order to achieve the best efficiency.In terms of supply current, there is a maximum value of 60V.As long as the supply current is less than 3mA, this device can provide high efficiency.There is no current that can be supplied to the load.As long as the switching frequency is maintained at 800kHz, this electronic component is able to perform all of its functions properly.There is no external factor that can consume current, so 2.65mA current is consumed.Currently, it is generating 58V voltage.
TPS92551TZ/NOPB Features
Available in the TO-PMOD-7, Power Module package
Operating temperature of -40°C~125°C TJ
Supply voltage of 48V
Switching frequency of 800kHz
Output voltage of 58V
TPS92551TZ/NOPB Applications
There are a lot of Texas Instruments TPS92551TZ/NOPB LED Driver ICs applications.
- LED headlights
- Street lighting
- OLED power supply for portable equipment
- Stage Lighting and Signage
- Dimmable LED for vehicle interiors
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Auxiliary lights for on-vehicle cameras
- Museum lighting
- Panel lighting
