TPS92660PWP/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 8.2V |
| Terminal Pitch | 0.635mm |
| Frequency | 500Hz |
| Base Part Number | TPS92660 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Max Supply Voltage | 80V |
| Output Current | 500mA |
| Max Supply Current | 2.2mA |
| Quiescent Current | 2.2mA |
| Max Output Voltage | 78V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 8.6V |
| Max Input Voltage | 80V |
| Min Output Voltage | 200mV |
| Input Characteristics | STANDARD |
| Internal Switch(s) | No |
| Dimming | PWM |
| Number of Segments | 4 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 48V |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS92660PWP/NOPB Overview
The 20-PowerTSSOP (0.173, 4.40mm Width) package saves space on the board. It has 2 outputs for LED drivers.The mounting method adopted is Surface Mount.DC DC Controller emerges with high efficiency and reliability.-40°C~125°C TJ is a valid operating temperature for the led driver.There are significant benefits for Lighting.The system operates at a frequency of 500Hz.It operates with 20 terminations.There are 20 pins on the base of this LED driver.There are 4 segments.It's mounted in Surface Mount.Part number TPS92660 represents this LED driver.Ideally, the supply voltage should be 80V.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.When the input voltage is set to 8.6V, it operates.The allowable maximum value of supply current reaches 80V.If the maximum current supply is less than 2.2mA, this device provides high efficiency.500mA is the maximum amount of current that can be supplied to the load.This electronic component can fully perform its functions when the switching frequency is kept at 1MHz.When operating at the maximum output current of 5A, it is capable of providing all the benefits associated with LED drivers.There is no external factor that can consume current, so 2.2mA current is consumed.It is important that the output voltage does not exceed 78V.The voltage it outputs stays at 200mV.
TPS92660PWP/NOPB Features
Available in the 20-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TJ
Frequency of 500Hz
Supply voltage of 8.2V
Switching frequency of 1MHz
TPS92660PWP/NOPB Applications
There are a lot of Texas Instruments TPS92660PWP/NOPB LED Driver ICs applications.
- Down lights
- Scanners and Handy Terminals
- LED backlight driver for LCD displays for Tablets and Note PCs
- Museum lighting
- Constant Voltage Power Source for portable equipment
- Replacement lamps
- Amusement Machines
- General lighting
- Gallery lighting
- OLED power supply for portable equipment
