TPS92682QRHMRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount, Wettable Flank |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Type | DC DC Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Automotive, Lighting |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 100kHz~700kHz |
| Base Part Number | TPS92682 |
| Number of Outputs | 2 |
| Input Voltage-Nom | 14V |
| Input Voltage (Min) | 6.5V |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 65V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Voltage - Supply (Max) | 65V |
| Voltage - Supply (Min) | 6.5V |
| Height Seated (Max) | 0.9mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
TPS92682QRHMRQ1 Overview
As a result of its 32-VFQFN Exposed Pad package, it helps to save board space on the board. 2 outputs are designed into LED drivers.Surface Mount, Wettable Flank represents this mounting method.In this case, the DC DC Controller emerges as highly efficient and reliable.It is possible for the led driver ic to operate normally at -40°C~125°C TA.Automotive, Lighting has considerable advantages.The system operates at a frequency of 100kHz~700kHz.For its operation, 32 terminations are designed.If the voltage supply is below 6.5V, undetermined failures may occur.Under the base part number TPS92682, you will find this LED driver.The supply voltage is optimized to offer a maximum value of 65V.There are many applications for this LED driver belonging to the Automotive, AEC-Q100 series.A circuit operated by the device has 14V volts.It is greatly simplified when used with input voltages greater than or equal to 6.5V.By keeping the input voltage below 65V, high stability can be achieved.
TPS92682QRHMRQ1 Features
Available in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 100kHz~700kHz
TPS92682QRHMRQ1 Applications
There are a lot of Texas Instruments TPS92682QRHMRQ1 LED Driver ICs applications.
- Down lights
- Refrigeration lighting
- Dimmable LED for vehicle interiors
- Linear fluorescent
- Amusement Machines
- Street lighting
- Architectural lighting
- Stage and Studio lighting
- Scanners and Handy Terminals
- Down lighting
