banner_page

TPS92690Q1PWP/NOPB

PMIC Automotive, AEC-Q100 Series TPS92690 16 Pin 350kHz~490kHz 16-PowerTSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS92690Q1PWP/NOPB
  • Package: 16-PowerTSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 596
  • Description: PMIC Automotive, AEC-Q100 Series TPS92690 16 Pin 350kHz~490kHz 16-PowerTSSOP (0.173, 4.40mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-PowerTSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -40°C~125°C TJ
Packaging Tube
Series Automotive, AEC-Q100
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
ECCN Code EAR99
Type DC DC Controller
Terminal Finish Matte Tin (Sn)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Frequency 350kHz~490kHz
Base Part Number TPS92690
Number of Outputs 1
Output Current -1mA
Max Supply Current 1mA
Quiescent Current 2mA
Topology Flyback, SEPIC, Step-Up (Boost)
Control Mode CURRENT-MODE
Control Technique FREQUENCY MODULATION
Internal Switch(s) No
Dimming PWM
Voltage - Supply (Max) 75V
Voltage - Supply (Min) 4.5V
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS92690Q1PWP/NOPB Overview


There is also a 16-PowerTSSOP (0.173, 4.40mm Width) package that is used to save space on the board. It has 1 outputs for LED drivers.The led light driver is mounted using Surface Mount.It is highly reliable and high-performing when it emerges as a DC DC Controller.The LED driver has the capability of operating at a temperature of -40°C~125°C TJ.This system operates at 350kHz~490kHz frequency.The configuration of the board is built around 16 pins.A voltage supply below 4.5V may cause undetermined failures.It has been mounted on Surface Mount.LED drivers are found under the base part number TPS92690.The supply voltage is optimized to offer a maximum value of 75V.The device can deliver high efficiency when the maximal supply current is less than 1mA.The current that can be supplied to the load is -1mA.LED drivers from the Automotive, AEC-Q100 series are essential components for a wide variety of products.Absent external factors, there is 2mA consumption of current.

TPS92690Q1PWP/NOPB Features


Available in the 16-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TJ
Frequency of 350kHz~490kHz

TPS92690Q1PWP/NOPB Applications


There are a lot of Texas Instruments TPS92690Q1PWP/NOPB LED Driver ICs applications.

  • A- lamps
  • Replacement lamps
  • Down lighting
  • Amusement Machines
  • Linear fluorescent
  • Other Electronic Devices
  • Dimmable LED for vehicle interiors
  • General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
  • Down lights
  • Sports Facility Lighting

Write a review

Note: HTML is not translated!
    Bad           Good