TPS92690Q1PWPR/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 350kHz~490kHz |
| Base Part Number | TPS92690 |
| Number of Outputs | 1 |
| Max Output Current | 5A |
| Max Supply Voltage | 75V |
| Min Supply Voltage | 4.5V |
| Output Current | -1mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2mA |
| Max Output Voltage | 72V |
| Topology | Flyback, SEPIC, Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 75V |
| Control Technique | FREQUENCY MODULATION |
| Min Output Voltage | 3V |
| Internal Switch(s) | No |
| Dimming | PWM |
| Max Input Voltage (DC) | 75V |
| Min Input Voltage (DC) | 4.5V |
| Nominal Input Voltage (DC) | 12V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS92690Q1PWPR/NOPB Overview
The board's 16-PowerTSSOP (0.173, 4.40mm Width) package saves space. LED drivers have a total of 1 outputs that are used in the design of the drivers.This mounting method is Surface Mount.With high efficiency, it appears as a DC DC Controller.When the temperature is -40°C~125°C TJ, it can work normally.Using the frequency of 350kHz~490kHz, it operates.With 16 pins at the base, this LED driver has a base configuration.As you can see, it is mounted by Surface Mount.Under the base part number TPS92690, you will find this LED driver.It is acceptable to operate with a supply voltage of 75V.The minimal input voltage is 4.5V.As a result, it is designed to operate at a minimal voltage of 4.5V to ensure the most efficiency possible.Whenever the maximum supply current is allowed, the value reaches 75V.With a minimum supply current less than 1mA, this device achieves high efficiency.A load can be supplied with -1mA current.At maximum output current 5A, it will deliver all the benefits of a LED driver.This LED driver belonging to the Automotive, AEC-Q100 series is a key component for a broad range of applications.Absent external factors, there is 2mA consumption of current.Voltages should not exceed 72V volts at the output.This device maintains a minimal voltage of 3V.
TPS92690Q1PWPR/NOPB Features
Available in the 16-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TJ
Frequency of 350kHz~490kHz
TPS92690Q1PWPR/NOPB Applications
There are a lot of Texas Instruments TPS92690Q1PWPR/NOPB LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- LED headlights
- General lighting
- Stage Lighting and Signage
- LED Lightings for Inspection Devices
- A- lamps
- Museum lighting
- Linear fluorescent
- Gallery lighting
- Stage and Studio lighting
