TRS202ECN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 955.690774mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TRS202 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of I/O | 8 |
| Nominal Supply Current | 15mA |
| Propagation Delay | 500 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TRS202ECN Overview
Driver ICs with enhanced 16-DIP (0.300, 7.62mm) packages are excellent for driving LEDs with common characteristics.The receiver is packaged in a Tube package.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.A Through Hole-type PCB or development board can be used to place this wide receiver.A power supply of 4.5V~5.5V is used by this differential driver.Up to 2/2 receivers/drivers can be installed simultaneously on this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.5V is the supply voltage range that this line driver ic can efficiently operate with.Wide receiver has 16 terminations built in for driving or receiving signals from data.In this package, you will find 16 market-standard pinouts for this transceiver.As the base part number TRS202 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.An enhanced power dissipation driver IC with 16 pins.Its package size is drastically reduced by downsizing ICs and utilizing high-density Through Hole mounting techniques.It is typical for this receiver to have a resolution of 2 bits when it is specified.An input voltage supply of 5V is required to operate the transceiver module.There is a subcategory named Line Driver or Receivers for this rf transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.There are 1 transceivers implemented in this module isolated transceiver.On the integrator circuit are embedded 2 drivers.There are 8 standard serial I/O ports on this IC, which makes it a very versatile one.
TRS202ECN Features
Tube package
16 pin count
16 pins
5V power supply
TRS202ECN Applications
There are a lot of Texas Instruments TRS202ECN Drivers/Receivers/Transceivers applications.
- Automation systems
- Point-to-point networking
- Metro access rings
- Cable network front end
- High-speed computer links
- IPTV front end
- transmission relay
- Cordless telephone
- Wireless modems
- Laser diode bonding
