TRS3386ECPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TRS3386 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 3/2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 3 |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Number of Receivers | 2 |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TRS3386ECPWR Overview
The enhanced 20-TSSOP (0.173, 4.40mm Width) package makes it an excellent LED driver.The receiver is packaged in a Tape & Reel (TR) package.As a Transceiver can transceiver, this part has enabled many applications to be served.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.This differential driver requires a 3V~5.5V power supply.At any given time, there can be up to 3/2 eligible receivers/drivers for this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.Integrated into this wide receiver are 20 terminations that are used for driving and receiving signals from data.The transceiver is packaged with 20 market standard pinouts so that it can be easily used.For more variants of this part, try searching with the base part number TRS3386, which indicates the product type, temperature, package, etc.20-pin driver IC with improved power dissipation control.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.The module isolated transceiver implements a total of 1 transceivers.This rf transceiver module can have?up to 2 eligible receivers on the field at once.?This electronic part can have?up to 3 eligible drivers on the field at once.?It has the ability to drive LEDs with an input voltage of up to about 1mA with the help of this integrating circuit.can transceivers with an input current greater than 1mA may have malfunctions.
TRS3386ECPWR Features
Tape & Reel (TR) package
20 pin count
20 pins
TRS3386ECPWR Applications
There are a lot of Texas Instruments TRS3386ECPWR Drivers/Receivers/Transceivers applications.
- Car radio
- Satellite communications networks
- Wireless projection application for conferences
- Desktop radio
- Wireless security systems
- Cell phones
- 1x/2x Fiber Channel
- Optical sub-assembly (OSA)
- Wireless interactive experience
- Thermal management
