TRSF3232EIPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TRSF3232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Propagation Delay | 300 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TRSF3232EIPWR Overview
Driver ICs with enhanced 16-TSSOP (0.173, 4.40mm Width) packages are excellent for driving LEDs with common characteristics.Tape & Reel (TR) package is used to mount this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.On any Surface Mount-type PCB or development board, this wide receiver can be placed.It takes 3V~5.5V from the power supply to run this differential driver.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.With a voltage range of 3.3V, this driver IC can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.In this package, you will find 16 market-standard pinouts for this transceiver.For more variants of this part, try searching with the base part number TRSF3232, which indicates the product type, temperature, package, etc.16-pin driver chip with enhanced power dissipation.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is a voltage input supply of 5V required for the operation of this integrated circuit.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.This IC implements 1 transceivers overall.The part is embedded with 2 drivers, so it can be used with 2 devices.
TRSF3232EIPWR Features
Tape & Reel (TR) package
16 pin count
16 pins
TRSF3232EIPWR Applications
There are a lot of Texas Instruments TRSF3232EIPWR Drivers/Receivers/Transceivers applications.
- Wireless security systems
- Wireless smart house
- WDM transmission
- Desktop radio
- AV receiver
- interconnection between switches
- Wireless communication
- Satellite ground stations
- Radio transmission
- Cable network front end
