TS117
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-DIP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Power (Watts) | 800mW |
| Max Power Dissipation | 800mW |
| Function | Relay Switch |
| Output Voltage | 350V |
| Number of Circuits | 2 |
| Output Current | 120mA |
| Throw Configuration | SPST |
| Forward Current | 50mA |
| Input Current | 50mA |
| Load Current | 120mA |
| Isolation Voltage | 3.75kV |
| Height | 3.3mm |
| Length | 9.65mm |
| Width | 8.07mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS117 Overview
Space is saved on the board by using the 8-DIP (0.300, 7.62mm) package.To pack telecommunications equipment, the way of Tube is used.In this case, Through Hole is the mounting type.2 circuits make up this telecom IC .Reliable performance can be offered when the operating temperature is set at -40°C~85°C.Mounted in the direction of Through Hole.Telecom interfaces contain 8 pins.The temperature is set at the minimum value of -40°C to ensure normal operation.It is necessary to set the temperature at the maximum value of 85°C for the telecom IC to function normally.With a 35Ohm resistance, it is able to work.
TS117 Features
Available in the 8-DIP (0.300, 7.62mm) package
TS117 Applications
There are a lot of IXYS Integrated Circuits Division TS117 Telecom applications.
- Digital loop carrier (DLC)
- Fractional T1/E1/J1
- Central office
- BITS Timing
- T1/E1/J1 add/drop multiplexers (MUX)
- Network Multiplexing and Terminating Equipment
- Fiber to the Home (FTTH)
- Fiber in the loop (FITL)
- DECT (Digital European Cordless Telephone) Base Stations
- Fiber
