TS117S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Supplier Device Package | 8-SMD |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2001 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Gull Wing |
| Resistance | 35Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Power (Watts) | 800mW |
| Max Power Dissipation | 800mW |
| Function | Relay Switch |
| Output Voltage | 350V |
| Number of Circuits | 2 |
| Throw Configuration | SPST |
| Input Current | 50mA |
| Height | 3.302mm |
| Length | 9.652mm |
| Width | 6.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS117S Overview
Board space can be saved by using the 8-SMD, Gull Wing package.For packing, Tube is used.Mounting type Surface Mount is used.This telecom IC is composed of 2 circuits.-40°C~85°C is a temperature setting that is reliable when telecom switching comes to performance.The mounting is in the way of Surface Mount.8 pins are located on this telecom interface.To ensure normal operation, -40°C must be set at a minimum value.It is necessary to set the temperature at the maximum value of 85°C for the telecom IC to function normally.As long as the resistance is greater than 35Ohm, it will be able to work.
TS117S Features
Available in the 8-SMD, Gull Wing package
TS117S Applications
There are a lot of IXYS Integrated Circuits Division TS117S Telecom applications.
- ISDN NT1/TA
- PBXs channel bank
- Network Multiplexing and Terminating Equipment
- Fractional T1/E1/J1
- Routers
- T1/E1/J1 Multiplexer and Channel Banks
- CSU/DSU Equipment
- Multichannel DS1 Test Equipment
- High-Density T1/E1/J1 interfaces for Multiplexers
- Digital Cross-Connect Systems
