TS12A12511DGKR

95ns, 50ns SPDT 5Ohm Typ Analog Switches BREAK-BEFORE-MAKE TS12A12511 8 Pins 1nA 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS12A12511DGKR
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 398
Description: 95ns, 50ns SPDT 5Ohm Typ Analog Switches BREAK-BEFORE-MAKE TS12A12511 8 Pins 1nA 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Switch-on Time-Max	95ns
Switch-off Time-Max	50ns
Drain to Source Resistance	8Ohm
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	8Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	TS12A12511
Pin Count	8
Number of Outputs	2
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	70nA
Nominal Supply Current	30nA
Max Supply Current	1μA
Turn On Delay Time	115 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.7V~6V
Supply Type	Dual, Single
Bandwidth	93MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	56 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	5Ohm Typ
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	14pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	95ns, 50ns
Charge Injection	26pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE

TS12A12511DGKR Overview

The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 2:1. Operation at a temperature around -40°C~85°C TA. In total, there have been 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. An electrical component like this is included in the 8 series. Based on SPDT switching circuits, these analog multiplexers work. Search with TS12A12511 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 8Ohm. For functions related to 8 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. The digital multiplexer has a low cost Dual, Single supply. 2.7V is the lowest voltage that should be fed to the electronic electronic part. This multiplexer would work with 70nA current. A digital multiplexer may suffer damage if voltage is applied above 1μA. There is no problem with using dual supply voltage, but it should not exceed 6V. For dual power supplies, a voltage of at least 2.7V should be attached. The 1 inputs need to be operated in order to work. 93MHz bandwidths enable data to be transferred. This electronic component presents a Drain to Source resistance of 8Ohm. The analog switch ics has 2 outputs.