Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
129.387224mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Resistance |
20Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
1.15W |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
1.27mm |
Base Part Number |
TS12A44513 |
Output |
SEPARATE OUTPUT |
Pin Count |
14 |
Number of Channels |
4 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Operating Supply Current |
50nA |
Power Dissipation |
1.15W |
Max Supply Current |
50nA |
Throw Configuration |
SPST |
Turn On Delay Time |
120 ns |
Number of Inputs |
4 |
Supply Type |
Single |
Bandwidth |
530MHz |
Turn-Off Delay Time |
80 ns |
On-State Resistance (Max) |
10Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
94 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
8pF 8pF |
On-state Resistance Match-Nom |
3.5Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
75ns, 45ns |
Charge Injection |
-10.5pC |
Channel-to-Channel Matching (ΔRon) |
2.5 Ω (Max) |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
175ns |
Voltage - Supply, Single (V+) |
2.7V~12V |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS12A44513DR Overview
Shipping overseas is convenient with the electronic component packed in 14-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. In total, 14 terminations have occurred. This electronic part offers high-quality output due to its 4 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. This electrical component is included in the 14 series of products. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. TS12A44513 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 20Ohm. For functions related to 14 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. An effective Single supply digital multiplexer. The lowest voltage the electronic part should receive is 2V. An operating current of 50nA would be sufficient for this switch device. This analogue multiplexer requires a voltage of 2.7V~12V when it drains from a single voltage supply. If you put voltage higher than 50nA on the digital multiplexer, damage may occur. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. The 4 inputs need to be operated in order to work. The data can be transferred over a wide range of bandwidths, called 530MHz bandwidths.
TS12A44513DR Features
4 Channels
Switch Circuit: SPST - NO/NC
50nA Supply Current
Bandwidth: 530MHz
TS12A44513DR Applications
There are a lot of Texas Instruments TS12A44513DR Analog Switches & Multiplexers ICs applications.
- Cable PC
- Fault Tolerant Systems
- Microprocessor controlled systems
- Cell phones
- Avionics test equipment
- Communications systems
- Precision test equipment
- USB 1.1 signal switching circuits
- Audio and video signal routing
- Industrial and process control systems