TS12A44514DR

75ns, 45ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS12A44514 14 Pins 1nA 3V 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS12A44514DR
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 821
Description: 75ns, 45ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS12A44514 14 Pins 1nA 3V 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Terminal Pitch	1.27mm
Base Part Number	TS12A44514
Output	SEPARATE OUTPUT
Pin Count	14
Number of Channels	4
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	50nA
Power Dissipation	1.15W
Max Supply Current	50nA
Throw Configuration	SPST
Turn On Delay Time	25 ns
Number of Inputs	4
Supply Type	Single
Bandwidth	530MHz
Turn-Off Delay Time	20 ns
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	94 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	75ns, 45ns
Charge Injection	-10.5pC
Channel-to-Channel Matching (ΔRon)	2.5 Ω (Max)
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	175ns
Voltage - Supply, Single (V+)	2.7V~12V
Normal Position	NO
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Weight	129.387224mg
Manufacturer Package Identifier	D(R-pdso-G14)
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	6.5Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.15W
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V

TS12A44514DR Overview

The electrical component comes in 14-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 14. This electronic part offers high-quality output due to its 4 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. Into the electrical component body are injected 14 pins. The analog switch ics are built using SPST - NO switching circuits. Try searching with TS12A44514 if you're looking for variants. An switch multiplexer with 6.5Ohm internal resistance has a value of 6.5Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 12V. Analogue multiplexers of the Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. The switch device would be able to operate with 50nA current. An analogue multiplexer drains from a single voltage supply at 2.7V~12V. A digital multiplexer may suffer damage if voltage is applied above 50nA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Operating 4 inputs is required. There are various bandwidths available for data transfer.