TS12A4515DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 20Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TS12A4515 |
| Pin Count | 8 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 50nA |
| Power Dissipation | 471mW |
| Max Supply Current | 50nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 120 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 475MHz |
| Turn-Off Delay Time | 80 ns |
| -3db Bandwidth | 520MHz |
| On-State Resistance (Max) | 10Ohm |
| High Level Output Current | 20mA |
| Low Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 94 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF 7.5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 75ns, 45ns |
| Charge Injection | -11.5pC |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Normal Position | NC |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS12A4515DR Overview
Shipping overseas is convenient with the electronic component packed in 8-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~85°C TA. The total number of terminations is 8. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3.3V voltage supply. It is injected into the electrical part body with 8 pins. These analog multiplexers are built based on SPST - NC switching circuits. If you are looking for variants of the digital switch, trying search with TS12A4515. A 20Ohm internal resistance characterizes this multiplexer. For functions related to 8 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 12V volts for the multiplexer. A cost-effective Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2V. This multiplexer would work with 50nA current. An analogue multiplexer drains from a single voltage supply at 2.7V~12V. The analogue multiplexer may be damaged if voltage is greater than 50nA. A 1 input needs to be operated. It is possible to transfer data over a 475MHz-bandwidth.
TS12A4515DR Features
1 Channels
Switch Circuit: SPST - NC
50nA Supply Current
-3db Bandwidth: 520MHz
Bandwidth: 475MHz
TS12A4515DR Applications
There are a lot of Texas Instruments TS12A4515DR Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- PBX interfaces
- Communication systems
- Audio and video signal routing
- Isolation
- Low-Voltage
- Fiber In The Loop (FITL)
- PDH Multiplexers
- Fault Tolerant Systems
- MP3 players
