TS12A4516DBVR

75ns, 45ns SPST - NO 20Ohm Analog Switches BREAK-BEFORE-MAKE TS12A4516 5 Pins 5nA 1.8V SC-74A, SOT-753

Manufacturer: Texas Instruments
Nocochips NO: 815-TS12A4516DBVR
Package: SC-74A, SOT-753
Datasheet: -
Stock: 317
Description: 75ns, 45ns SPST - NO 20Ohm Analog Switches BREAK-BEFORE-MAKE TS12A4516 5 Pins 5nA 1.8V SC-74A, SOT-753(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Surface Mount	YES
Number of Pins	5
Weight	11.198062mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Resistance	20Ohm
Additional Feature	SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V
Subcategory	Multiplexer or Switches
Max Power Dissipation	471mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Base Part Number	TS12A4516
Pin Count	5
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	6V
Min Supply Voltage	1V
Operating Supply Current	70μA
Power Dissipation	471mW
Max Supply Current	-70μA
Throw Configuration	SPST
Turn On Delay Time	120 ns
Number of Inputs	1
Supply Type	Dual
Bandwidth	464MHz
Neg Supply Voltage-Nom (Vsup)	-1.8V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	20Ohm
Min Dual Supply Voltage	1V
High Level Output Current	20mA
Low Level Output Current	20mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	83 dB
Current - Leakage (IS(off)) (Max)	5nA
Channel Capacitance (CS(off), CD(off))	5.5pF 5.5pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	75ns, 45ns
Charge Injection	-13pC
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	47Ohm
Normal Position	NO
Voltage - Supply, Dual (V±)	±1V~6V
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS12A4516DBVR Overview

The electronic part can be shipped overseas conveniently because it is packaged in SC-74A, SOT-753. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~85°C TA extended. In total, there are 5 terminations. A electrical component with 1 channels is capable of high-quality output. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 5 pins. SPST - NO switching circuits are used in these analog switch ics. Try searching for TS12A4516 variants of the analog switch ic. This digital multiplexer has 20Ohm internal resistance. For details about the functions of 5 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 6V in normal situations. The analog switch ic is of the Dual supply type and is cost-effective. A low voltage of 1V should be applied to the electronic component. This multiplexer would work with 70μA current. If put voltage greater than -70μA on the device, damage may be caused to the analogue multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 6V. If you are using a dual power supply, you should attach at least 1V. In order to operate the 1 inputs, there are several steps to follow. 464MHz-bandwidths can be used to transfer data between multiplexers. Additional features of the electronic component include: SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V. This electronic component presents a Drain to Source resistance of 47Ohm.

TS12A4516DBVR Features

1 Channels
Switch Circuit: SPST - NO
70μA Supply Current
Bandwidth: 464MHz
Additional Features: SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V
Drain-to-Source resistance: 47Ohm