TS12A4516DG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Power Dissipation-Max | 471mW |
| Operating Supply Current | 70μA |
| Power Dissipation | 471mW |
| Max Supply Current | 70μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 120 ns |
| Input Voltage (Min) | -4.5V |
| Input Voltage (Max) | 5.5V |
| Supply Type | Dual |
| Bandwidth | 464MHz |
| Neg Supply Voltage-Nom (Vsup) | -1.8V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 1V |
| Off-state Isolation-Nom | 83 dB |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TS12A4516DG4 Overview
The electrical component comes in SOIC packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Rail/Tube is used. There are 8 terminations totally. Due to its 1 channels, the electrical component produces high-quality output. With a 1.8V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 8 series. A 20Ohm internal resistance characterizes this multiplexer. For functions related to 8 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. A analog switch ic that has a cost-effective Dual supply type. It is recommended that the electrical component receives a voltage of 1V. This digital switch can be operated with a current of 70μA. A digital multiplexer may suffer damage if voltage is applied above 70μA. Despite this switch device's dual supply capability, its voltage should not exceed 6V. The voltage should be at least 1V if you are using dual power supplies. 464MHz-bandwidths can be used to transfer data between multiplexers. This electronic part has additional features, such as: SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V. It is not recommended to operate the switches in an environment with a temperature higher than 85°C. In this digital multiplexer, there are 1 outputs.
TS12A4516DG4 Features
1 Channels
70μA Supply Current
Bandwidth: 464MHz
Additional Features: SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V
TS12A4516DG4 Applications
There are a lot of Texas Instruments TS12A4516DG4 Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- SDH
- Private Branch Exchange (PBX)
- High speed data transmission line cards
- SDH/SONET multiplexers
- Transmit
- Digital cross connects (DSX-1)
- SONET
- PDH Multiplexers
- High reliability control systems
