TS12A4517D

75ns, 45ns SPST - NC 20Ohm Analog Switches BREAK-BEFORE-MAKE TS12A4517 8 Pins 5nA 1.8V 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS12A4517D
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 623
Description: 75ns, 45ns SPST - NC 20Ohm Analog Switches BREAK-BEFORE-MAKE TS12A4517 8 Pins 5nA 1.8V 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Max Supply Current	70μA
Throw Configuration	SPST
Turn On Delay Time	120 ns
Number of Inputs	1
Supply Type	Dual
Bandwidth	464MHz
Neg Supply Voltage-Nom (Vsup)	-1.8V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	20Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	83 dB
Current - Leakage (IS(off)) (Max)	5nA
Channel Capacitance (CS(off), CD(off))	5.5pF 5.5pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	75ns, 45ns
Charge Injection	-13pC
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Voltage - Supply, Dual (V±)	±1V~6V
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	75.891673mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	20Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V
Subcategory	Multiplexer or Switches
Max Power Dissipation	471mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Base Part Number	TS12A4517
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	1
Max Supply Voltage	6V
Min Supply Voltage	1V
Operating Supply Current	70μA
Power Dissipation	471mW

TS12A4517D Overview

Packed in 8-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. The total number of terminations is 8. The electronic part provides high-quality output because it has 1 channels. When the electronic component is given a voltage of 1.8V, it should be turned on and run. As part of the design of the 8 series, this electronic part has been incorporated into the system. Based on SPST - NC switching circuits, these analog multiplexers work. Try searching for the analog switch ic with TS12A4517 if you are looking for variants. This digital multiplexer has 20Ohm internal resistance. Datasheets for functions of 8 pins are available. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. A analog switch ic that has a cost-effective Dual supply type. It is recommended that the electrical component receives a voltage of 1V. An operating current of 70μA would be sufficient for this switch device. A voltage higher than 70μA may cause damage to the switch multiplexer. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 1V. This analog switch ic utilizes SEPARATE OUTPUT output. There are 1 inputs to be operated. There are 464MHz bandwidths for data transfer. Don't forget the additional features of this electronic part, such as: SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V.