TS12A4517DBVR

75ns, 45ns SPST - NC 20Ohm Analog Switches BREAK-BEFORE-MAKE TS12A4517 5 Pins 5nA 1.8V SC-74A, SOT-753

Manufacturer: Texas Instruments
Nocochips NO: 815-TS12A4517DBVR
Package: SC-74A, SOT-753
Datasheet: -
Stock: 181
Description: 75ns, 45ns SPST - NC 20Ohm Analog Switches BREAK-BEFORE-MAKE TS12A4517 5 Pins 5nA 1.8V SC-74A, SOT-753(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Weight	11.198062mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Resistance	20Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V
Subcategory	Multiplexer or Switches
Max Power Dissipation	471mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Base Part Number	TS12A4517
Output	SEPARATE OUTPUT
Pin Count	5
Number of Channels	1
Max Supply Voltage	6V
Min Supply Voltage	1V
Operating Supply Current	70μA
Power Dissipation	471mW
Max Supply Current	-70μA
Throw Configuration	SPST
Turn On Delay Time	120 ns
Number of Inputs	1
Supply Type	Dual
Bandwidth	464MHz
Neg Supply Voltage-Nom (Vsup)	-1.8V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	20Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	83 dB
Current - Leakage (IS(off)) (Max)	5nA
Channel Capacitance (CS(off), CD(off))	5.5pF 5.5pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	75ns, 45ns
Charge Injection	-13pC
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	47Ohm
Normal Position	NC
Voltage - Supply, Dual (V±)	±1V~6V
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS12A4517DBVR Overview

The electronic part can be shipped overseas conveniently because it is packaged in SC-74A, SOT-753. High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 5. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. An electrical component like this is included in the 5 series. A SPST - NC switching circuit is used for these analog switches. Try searching with TS12A4517 to find analog multiplexer variants. Analog switches have 20Ohm internal resistance. The datasheets for the 5 pins explain the functions. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. A analog switch ic that has a cost-effective Dual supply type. It is recommended to use 1V as the lowest voltage for the electrical part. The switch device would be able to operate with 70μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than -70μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. In the case of dual power supplies, you should connect at least 1V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. Operating 1 inputs is required. The transfer of data can be performed over 464MHz bandwidths. Don’t miss additional features of the electronic component such as: SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V. It has a Drain to Source resistance of 47Ohm ohms.

TS12A4517DBVR Features

1 Channels
Switch Circuit: SPST - NC
70μA Supply Current
Bandwidth: 464MHz
Additional Features: SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V
Drain-to-Source resistance: 47Ohm