banner_page

TS12A4517DR

75ns, 45ns SPST - NC 20Ohm Analog Switches BREAK-BEFORE-MAKE TS12A4517 8 Pins 5nA 1.8V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TS12A4517DR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 395
  • Description: 75ns, 45ns SPST - NC 20Ohm Analog Switches BREAK-BEFORE-MAKE TS12A4517 8 Pins 5nA 1.8V 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 75.891673mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 20Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V
Subcategory Multiplexer or Switches
Max Power Dissipation 471mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Base Part Number TS12A4517
Output SEPARATE OUTPUT
Pin Count 8
Number of Channels 1
Max Supply Voltage 6V
Min Supply Voltage 1V
Operating Supply Current 70μA
Power Dissipation 471mW
Max Supply Current 70μA
Throw Configuration SPST
Turn On Delay Time 120 ns
Number of Inputs 1
Supply Type Dual
Bandwidth 464MHz
Neg Supply Voltage-Nom (Vsup) -1.8V
Turn-Off Delay Time 150 ns
Max Dual Supply Voltage 6V
On-State Resistance (Max) 20Ohm
Min Dual Supply Voltage 1V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 83 dB
Current - Leakage (IS(off)) (Max) 5nA
Channel Capacitance (CS(off), CD(off)) 5.5pF 5.5pF
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 75ns, 45ns
Charge Injection -13pC
Switching BREAK-BEFORE-MAKE
Normal Position NC
Voltage - Supply, Dual (V±) ±1V~6V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TS12A4517DR Overview


Due to its 8-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Temperatures around -40°C~85°C TA are extended for operation. A total of 8 terminations have been recorded. The electronic part provides high-quality output because it has 1 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 8 series of products. These analog multiplexers are built based on SPST - NC switching circuits. Use TS12A4517 to search for variants of the digital switches. There is 20Ohm internal resistance in this digital multiplexer. For functions related to 8 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. An effective Dual supply digital multiplexer. A low voltage of 1V should be applied to the electronic component. The switch device would be able to operate with 70μA current. The analogue multiplexer may be damaged if voltage is greater than 70μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. If you are using dual power supplies, you should attach at least 1V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. It is possible to operate 1 inputs. A 464MHz-bandwidth can be used for data transfer. Additional features include: SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V.

TS12A4517DR Features


1 Channels
Switch Circuit: SPST - NC
70μA Supply Current
Bandwidth: 464MHz
Additional Features: SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V

TS12A4517DR Applications


There are a lot of Texas Instruments TS12A4517DR Analog Switches & Multiplexers ICs applications.

  • Audio signal routing
  • FTTH
  • T1/E1 Terminals
  • Public switching systems
  • Fiber In The Loop (FITL)
  • Microprocessor controlled systems
  • Signal routing between systems
  • PCMCIA cards
  • USB 1.1 signal switching circuits
  • ISDN NT1/TA

Write a review

Note: HTML is not translated!
    Bad           Good