TS1852IST

48mA per Channel 16nA 65 dB Instrumentational OP Amps 0.055μA 1.8V~6V TS1852 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-TS1852IST
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 785
Description: 48mA per Channel 16nA 65 dB Instrumentational OP Amps 0.055μA 1.8V~6V TS1852 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Pin Count	8
Output Type	Rail-to-Rail
Number of Elements	2
Operating Supply Current	162μA
Nominal Supply Current	170μA
Output Current	46mA
Slew Rate	0.25V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	16nA
Voltage - Supply, Single/Dual (±)	1.8V~6V
Output Current per Channel	48mA
Input Offset Voltage (Vos)	3mV
Gain Bandwidth Product	630kHz
Unity Gain BW-Nom	600 kHz
Voltage Gain	97dB
Average Bias Current-Max (IIB)	0.055μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	1mV
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.063μA
Programmable Power	NO
Wideband	NO
Power	NO
Height Seated (Max)	1.1mm
Length	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn) - annealed
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	TS1852

TS1852IST Overview

Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. This is a General Purpose type op amp. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations is approaching the 8 mark. A total of 8 pins are located on this board. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 8 pins. Op amp ic rates 3mV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using an 162μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. On the output type, there are Rail-to-Rail different types of op amps. For the operating supply voltage of the op amp ic, there is a rating of 2. It is used TAPE AND REEL to pack the op amps.