TS1874IPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TS1874 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 2/5V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 560μA |
| Output Current | 68mA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 70nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~6V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 1.8MHz |
| Unity Gain BW-Nom | 1600 kHz |
| Voltage Gain | 97dB |
| Average Bias Current-Max (IIB) | 0.15μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.13μA |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS1874IPT Overview
Op amp is packaged in 14-TSSOP (0.173, 4.40mm Width) case. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 14 terminations. Buffer amplifier has a total of 14 pins. As a reminder, this buffer op amp should be powered by 1.8V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 14 pins on it. Regarding input offset voltage, op amp rates 3mV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using an 500μA supply current, this operational amplifier ics can be operated. It is a member of the 97dB's 97dB family. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The linear amplifier consists of 4 different elements in total. The linear amplifier is packaged by using a TAPE AND REEL axis.
TS1874IPT Features
14 Pins
supply voltage of 1.8V
97dB voltage gain
Output Type: Rail-to-Rail
TS1874IPT Applications
There are a lot of STMicroelectronics TS1874IPT Instrumentational OP Amps applications.
- Mobile phone
- Large motor controllers
- Navigation
- Home audio systems
- Power generator
- Communication device
- Signal filtering
- ECG equipment
- Commercial audio systems
- Television
