TS27L2CN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Base Part Number | TS27L2 |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Power Supplies | 5/10V |
| Number of Channels | 2 |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 30μA |
| Output Current | 60mA |
| Slew Rate | 0.04V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 100 kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.00015μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.1mV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS27L2CN Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. An op amp of this type is a General Purpose-type. A Tube case is used for delivering the op amp. It is estimated that there will be 8 terminations in the next few months. The total number of pins on linear amplifier is 8. This linear amplifier should be powered by an 10V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 8 pins. In terms of input offset voltage, operational amplifier rates 10mV. This electrical part should be mounted using type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. Using a supply current of 10μA , this buffer op amp will be able to operate. The voltage gain should stay at 100dB. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 8V voltage.
TS27L2CN Features
8 Pins
supply voltage of 10V
100dB voltage gain
TS27L2CN Applications
There are a lot of STMicroelectronics TS27L2CN Instrumentational OP Amps applications.
- Navigation
- Communication device
- Micro signal measurement
- Blood pressure sensors
- Mobile phone
- Subtraction operation circuits
- Test equipment
- Digital cameras
- High-frequency data acquisition systems
- Biopotential
