TS27L2CPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | TS27L2 |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Number of Elements | 2 |
| Power Supplies | 5/10V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 30μA |
| Output Current | 60mA |
| Slew Rate | 0.04V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 10mV |
| Gain Bandwidth Product | 100kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.00015μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.1mV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Length | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS27L2CPT Overview
In the package, you will find a 8-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 10V. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are available on the instrumentation amplifier. The input offset voltage is 10mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges 0°C~70°C. The buffer amplifier is capable of operating from a supply current of 10μA . Voltage gain should remain at 100dB. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of the buffer op amp is rated at 8V. This linear amplifier pack is based on the TAPE AND REEL axis.
TS27L2CPT Features
8 Pins
supply voltage of 10V
100dB voltage gain
TS27L2CPT Applications
There are a lot of STMicroelectronics TS27L2CPT Instrumentational OP Amps applications.
- Computer workstations
- Hand-held batteries
- Power generator
- Communication
- Industrial control system
- Gaming industry
- Information processing
- ECG equipment
- Portable media players
- Cinema or auditorium audio system
