TS27L4CDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS27L4 |
| Pin Count | 14 |
| Operating Supply Voltage | 8V |
| Number of Elements | 4 |
| Power Supplies | 10V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 60μA |
| Output Current | 60mA |
| Slew Rate | 0.04V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 10mV |
| Gain Bandwidth Product | 100kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.00015μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.1mV |
| Low-Bias | YES |
| Micropower | YES |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS27L4CDT Overview
It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. General Purpose-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. In total, there are 14 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 10V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. There are 14 pins on this chip. Regarding input offset voltage, op amp rates 10mV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at 0°C~70°C. The buffer amplifier is capable of operating from a supply current of 10μA . Voltage gain should remain at 100dB. This linear amplifier has a total of 4 elements. The operating supply voltage of instrumentation amplifier is rated 8V voltage. TAPE AND REEL is adopted to pack the instrumentation amplifier.
TS27L4CDT Features
14 Pins
supply voltage of 10V
100dB voltage gain
TS27L4CDT Applications
There are a lot of STMicroelectronics TS27L4CDT Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Automatic control
- Fission chambers
- Thermocouples
- Video data acquisition
- Voltage regulation circuit
- RF cable systems
- Precision measurement
- Test and measurement instruments
- Television
