TS27L4IPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TS27L4 |
| Pin Count | 14 |
| Operating Supply Voltage | 8V |
| Power Supplies | 10V |
| Number of Channels | 4 |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 60μA |
| Output Current | 60mA |
| Slew Rate | 0.04V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 100 kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.1mV |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 100kHz |
| Dual Supply Voltage | 18V |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS27L4IPT Overview
Op amp is packaged in 14-TSSOP (0.173, 4.40mm Width) case. A General Purpose-type buffer amplifier is shown here. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 14. It consists of a total of 14 pins in total. I would like to remind you that this buffer op amp should be powered by an 10V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 14 pins. There is an input offset voltage of 10mV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. As long as the supply current of the chip does not exceed 10μA, this op amp ic can operate. It is a member of the 100dB's 100dB family. The op amp ic has 4 channels on it. The operating supply voltage of instrumentation amplifier is rated 8V voltage. TAPE AND REEL is adopted to pack the instrumentation amplifier.
TS27L4IPT Features
14 Pins
supply voltage of 10V
100dB voltage gain
TS27L4IPT Applications
There are a lot of STMicroelectronics TS27L4IPT Instrumentational OP Amps applications.
- PDA
- Fast A/D and D/A converters
- Automation control systems
- Strain gauges
- E-book readers
- High input resistance broadband
- Test and measurement instruments
- Home audio systems
- Micro signal measurement
- Signal filtering
