TS27M2CDT
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS27M2 |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Number of Elements | 2 |
| Power Supplies | 5/10V |
| Operating Supply Current | 150μA |
| Nominal Supply Current | 400μA |
| Output Current | 45mA |
| Min Input Voltage | 3V |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Max Input Voltage | 16V |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 93.98dB |
| Average Bias Current-Max (IIB) | 0.00015μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.1mV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
TS27M2CDT Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 10V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. Op amp rates 10mV as input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . Using a supply current of 150μA , this buffer op amp will be able to operate. Op amp is a member of the 93.98dB's 93.98dB family. The total number of elements in this buffer amplifier is 2. The operating supply voltage of the buffer op amp is rated at 8V. The linear amplifier is packaged by using a TAPE AND REEL axis.
TS27M2CDT Features
8 Pins
supply voltage of 10V
93.98dB voltage gain
TS27M2CDT Applications
There are a lot of STMicroelectronics TS27M2CDT Instrumentational OP Amps applications.
- Video data acquisition
- Biopotential
- Scintillation detectors
- Instrumentation
- Power control
- Weighing systems
- RF cable systems
- Radiation thermometry transducers
- Hand-held batteries
- ECG equipment
