TS3001ITD822T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-TDFN (2x2) |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| Series | NanoWatt Analog™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Oscillator, Silicon |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.951W |
| Voltage - Supply | 0.9V~1.8V |
| Frequency | 5.2kHz~90kHz |
| Operating Supply Voltage | 1V |
| Number of Channels | 1 |
| Max Supply Voltage | 1.8V |
| Min Supply Voltage | 900mV |
| Operating Supply Current | 2.1μA |
| Nominal Supply Current | 1μA |
| Frequency Tolerance | 2% |
| Current - Supply | 2.1μA |
| Number of Timers/Counters | 1 |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Height | 750μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TS3001ITD822T Overview
8-WFDFN Exposed Pad comes in a package with the timer clock. This programmable timer has been set to 5.2kHz~90kHz frequencies.It is used to pack in Cut Tape (CT) case. There are several types of mounting available: such as Surface Mount.It is possible to supply a voltage of 0.9V~1.8V to the programmable timer.The type of chips can be divided into Oscillator, Silicon. The operating temperature of this timer clock is -40°C~85°C. To mount this digital timer with Surface Mount. To keep the clock timer's supply current at 2.1μA. The operating supply voltage is rated at 2.1μA voltage. The NanoWatt Analog? relates to the digital timer's series. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The timer clock contains 8 pins. The digital timer's operating supply voltage is rated 1V voltage. The digital timer has a frequency tolerance value of 2%. The minimum supply voltage of the chip must not be lower than 900mV. The supply voltage of this chip should not exceed 1.8V. The number of Timers/Counters on the device is 1.
TS3001ITD822T Features
Operate frequency at 5.2kHz~90kHz
Package / Case: Cut Tape (CT)
Mounting Type:Surface Mount
Current - Supply：2.1μA
Max Operating temperature at -40°C
1 Timers/Counters
TS3001ITD822T Applications
There are a lot of Touchstone Semiconductor TS3001ITD822T Programmable Timers & Oscillators applications.
- Internet of Things (IoT)
- Safety and Security Platforms
- Motor control
- White Goods
- Remote Data-Logger
- Car Door Handle circuit
- Power-On Reset Timer
- Delay circuits
- Clutch Actuator circuit
- Electric Vehicles
